1. Detachable Vaginal Insert
For both TPE and silicone, detachable vaginal inserts can only be made with a total length of approximately 18 cm.
2. Default Channel Lengths
① Silicone:
Anal depth: 12.5 cm
Vaginal depth: 18 cm
With built-in/external suction: vaginal depth becomes 10 cm or less
② TPE (except TPE150):
Anal depth: 13 cm
Vaginal depth: 18 cm
⚠️ TPE150:Vaginal depth: 16 cm
Anal depth: 13 cm
③ Half-body torso models:
Anal depth: 12 cm
Vaginal depth: 18 cm
④ Important Note:
The above measurements refer to the textured section only.
Each channel also includes an additional non-textured entrance section:
Vaginal entrance: approx. 2 cm
Anal entrance: approx. 1.5 cm
👉 Total channel length = textured section + non-textured section
3. Custom Channel Length (Extension/Reduction)
① Silicone:
Anal: up to 14 cm
Vaginal: up to 20 cm
Maximum extension: +2 cm from default
② TPE:
Anal: up to 15 cm
Vaginal: up to 20 cm
Maximum extension: +2 cm from default
③ Half-body torso models:
Anal: up to 12 cm
Vaginal: up to 18 cm
⚠️ Due to high production difficulty, customization is not recommended and generally not offered unless necessary.
Note:
For channel length customization, it is recommended to modify from the inner end (tail side) while keeping the original entrance unchanged.
Otherwise, issues such as narrow entrance or difficulty entering may occur.
4. Channel Diameter
Standard core diameter: approx. 1.5–2 cm
Maximum core diameter: approx. 3 cm
Currently only available for models: B1, B4
👉 After molding, the channel can be stretched to approximately 5 cm
5. Oral Depth
① Soft head (Silicone & TPE):
Default oral depth: approx. 12–14 cm
② Most ROS heads:
Default oral depth: approx. 16 cm
Exceptions (shorter channels ~11 cm):
S1, S20, S29
③ ROS MAX heads:
Default oral depth: approx. 13 cm
⚠️ Note:
All measurements are manually taken and may have an error margin of ±1 cm.